The transfer roller is often the culprit if your prints are getting streaky, spotty, or are just looking generally less sharp than they should. It collects dust, toner, and even paper fibers, which are everything you do not want to accumulate over the years.
In simple terms, the transfer roller is the soft, black or grey roller that lies within your laser printer. It is located underneath the toner cartridge and transfers that image onto the paper. A dirty one directly affects your print quality.
How to Tell It’s Time for Some Tidying Up:
1. Faint or uneven printouts
2. Random streaks or smudges
3. Toner not completely adhering to the page
4. Stating that it has started to jam paper more than normal
If so, any of these, all the transfer roller needs is a quick clean, not a replacement at this point.
What You’ll Need
1. Use lint lint-free cloth or a soft microfiber cloth
2. Distilled water or high-concentration isopropyl alcohol (90% or more)
3. OPTIONAL: gloves (so your hands don’t get oily from touching your roller)
4. Lanterne (faciliter la visibilité au fond)
Let’s Clean It—Step by Step
1. Power Off and Unplug
Seriously—don’t skip this. Safety first. If the printer has been printing, allow it to cool for a couple of minutes.
2. Accessing the Printer and Finding the Rollermore
Do not have the toner cartridge pull the toner cartridge out there seeking the transfer roller, the transfer roller. Most often, this is a rubbery roller located just below where the toner sits
3. Gently Wipe the Surface
Moisten your textile with a small amount of isopropyl alcohol or distilled water. Slowly roll and wipe the transfer roller, rotating it as you go. Be careful not to press on it too much, it is soft and can get damaged
4. Let It Dry
Let it air dry for a couple of minutes. So you have to avoid using a hair dryer or a heater. Just… let it breathe.
5. Reassemble and Test
Reassemble everything (including the printer), turn on the printer, and do a few test prints. Assuming all went well, your prints should be nicer and crisper.
What NOT to Do
1. Avoid using paper towels or tissues as they leave lint behind.
2. Do not soak the roller—a simple damp wipe will do.
3. Avoid touching the roller with bare fingers — skin oils are bad for it.
4. No abrasive cleaners; just use alcohol or water.
It takes practice and a careful hand, and cleaning a transfer roller isn’t exactly rocket science. When your printer has bad behavior and if the toner or drum is not to blame, then the roller should be replaced. Maintenance like this will prolong the life of your printer and save you from an unwanted replacement.
Honhai Technology is committed to providing customers with high-quality printer solutions. For example, Transfer Roller for HP Laserjet 1000 1150 1200 1220 1300, Transfer Roller for Canon IR 2016 2018 2020 2022 FC64313000, Transfer Roller for Samsung Ml 3560 4450, Transfer Roller for Samsung Ml-3051n 3051ND 3470d 3471ND, Transfer Roller for Samsung Ml3470, Transfer Roller for Ricoh MP C6003, Original new Transfer roller for Xerox B1022 B1025 022N02871, Transfer Roller for Ricoh Aficio 1022 1027 2022 2027 220 270 3025 3030, Transfer Roller for Xerox Docucolor 240 242 250 252 260 Workcentre 7655 7665 7675 7755, etc. If you are interested, please feel free to contact our sales team at：
sales8@copierconsumables.com,
sales9@copierconsumables.com,
doris@copierconsumables.com,
jessie@copierconsumables.com,
chris@copierconsumables.com,
info@copierconsumables.com.
Post time: Jun-17-2025